Displaying Disc Titles; Using Cd Text Functions; Displaying Titles On Cd Text Discs; Scrolling Titles In The Display - Pioneer DEH-P5750MP Manual De Operación

Built-in CD Player
Notes
! Titles remain in memory, even after the disc
has been removed from the unit, and are re-
called when the disc is reinserted.
! After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.

Displaying disc titles

You can display the title of any disc that has
had a disc title entered.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDisc Title (disc title)
When you select Disc Title, the title of the cur-
rently playing disc is shown in the display.
# If no title has been entered for the currently
playing disc, No Title is displayed.

Using CD TEXT functions

Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.

Displaying titles on CD TEXT discs

% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
Play timeDisc Title (disc title)ArtistName
(disc artist name)TrackTitle (track title)
ArtistName (track artist name)
# If specific information has not been recorded
on a CD TEXT disc, No XXXX will be displayed
(e.g., No TRK TTL).

Scrolling titles in the display

This unit can display the first 10 letters only of
Disc Title, ArtistName, TrackTitle and
ArtistName. When the recorded information
is longer than 10 letters, you can scroll the text
to the left so that the rest of the title can be
seen.
% Press DISPLAY and hold until the title
begins to scroll to the left.
The rest of the title will appear in the display.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. If you want to display the first 10 charac-
ters of text information temporarily and scroll
from the beginning, press and hold DISPLAY.
About Ever Scroll, refer to Switching the Ever
Scroll on page 40.
Section
05
17
En