Ferguson REGENT P1 DAB+ Manual De Instrucciones página 35

Alarm Parameters:

On time – hours and minutes

Duration – 15 | 30 | 45 | 60 | 90 minutes, If the alarm is not cancelled the unit
will return to standby after this time period.

Alarm Type (Source) –

Buzzer | DAB | FM .Alarm Mode –Daily |
Once | Weekends | Weekdays, choose the
days on which the alarm is active.

Alarm – Off | On
After Alarm on is selected, the alarm1 will be armed automatically, the alarm1 alert icon
stops flashing.
Set the Alarm 2
Select the submenu Alarm from the main menu System,
"Alarm 1 Setup" is shown on the display, rotary and then
press the Tune/Navigate knob to select "Alarm2 Setup" to
enter Alarm 2 setting.

The other setting of Alarm2 refers to Alarm1 setting described above.
Notes:
- To ensure the alarm function works properly, make sure that the volume level is set at a
proper position before turning off the unit.
- The alarm sound can wake up in standby mode only; please do not switch off the power
by the power ON/OFF selector after alarm setting, otherwise, the alarm sound can't work.
- If the DAB or FM alarm type is selected, the alarm will turn on and broadcast the last
channel before turning off the unit.
- At the set time, the alarm will sound, quietly at first, then gradually building up to the set
volume. When an alarm sounds, the bell icon in the display flashes.
- Press the Tune/Navigate knob to cancel the Alarm when it is activated.