Time Setting - Technoline WT290 Manual De Instrucciones

hour time display. In 12 hour time display the AM icon will be displayed in the time before noon and the
PM icon will be displayed in the time after noon.

TIME SETTING

While viewing normal time display, hold the SET button to enter the time setting and the hour
digits flash. Press the °C/°F / UP or the 12/24 / DOWN button to set the hour.
Press the SET button to confirm and the minute digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the minute.
Press the SET button to confirm and the year digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the year.
Press the SET button to confirm and the month digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the month.
Press the SET button to confirm and the date digits flash. Press the °C/°F / UP or the 12/24 /
DOWN button to set the date.
Press the SET button to confirm and the time zone digits flash. Press the °C/°F / UP or the
12/24 / DOWN button to set the time zone value between -12 and +12 hours. For example, +0
is used for Germany and -1 is used for the UK
Press the SET button to confirm and exit the time setting.
Notes:
Time zone icon (ZONE) is shown on the display once a time zone is set (beside 0)
Press and hold the the °C/°F / UP or the 12/24 / DOWN button to speed up setting process.
The setting will automatically return to time display mode, if no button is used for 30 seconds
Page 4