Publicidad
IR SYNC SETUP
To connect your microphone to the unit, first insert
the required batteries into the microphone. Press
the ID button on the receiver until you see the
pairing signal. If connected to a speaker or PA
system, you will hear a beep.
To pair a handheld microphone, double press
the microphones power button and the indicator
will flash. To pair a beltpack transmitter, press
the ID setting button (located under the battery
compartment cover) until you see the indicator flash.
When the sound disappears and the indicator stops
flashing, the transmitter will be paired with the
receiver. To confirm pairing has been successful,
check the frequency and channel number on the
microphone matches that of the receiver unit.
NOTE: Please connect your lavalier or headset
microphone to the receiver pack by inserting the
mini-jack connector on your microphone to the
female threaded mini-jack input port on the receiver
1. GRILLE
Covers and protects the microphone capsule.
2. LCD DISPLAY
Shows important information.
3. POWER SWITCH
Turns the microphone on and off.
4. BATTERY COMPARTMENT
Remove the cover and insert 2 x AA batteries.
5. VOLUME KNOB (SZW-100L, SZW-100S, SZW-
200L + SZW-200S)
Twist to turn the unit on/off and adjust volume.
LCD DISPLAY
The LCD display shows important information
related to the unit's performance.
RF
Indicates the signal quality level.
AF
Indicates the level of the signal entering the unit.
CHANN
Shows which channel the unit is operating on.
FREQUENCY
Shows the frequency being used in MHz.
1
2
3
4
5
2
4
7
SZW-200H
FREQUENCY 2.404GHz – 2.474GHz
3
SZW-200L
FREQUENCY 2.404GHz – 2.474GHz
SZW-200H
FREQUENCY 2.404GHz – 2.474GHz
SZW-200
FREQUENCY 2.404GHz – 2.47
Publicidad
