Installation And Start-Up; Installing The Fixture; Connecting To Mains Supply - Claypaky XTYLOS Manual Del Usuario

WARNING: Operators shall control access to the beam within the hazard distance or install the product at the height that will
prevent spectators eyes from being within the hazard distance.
6
Installing the luminaire - Fig. 6
The luminaire can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall.
WARNING: the luminaire must always be securely mounted and immobilized, also when installed on the floor, in a way that accidental
redirection of the fixture is not occurring.
WARNING: with the exception of when the luminaire is positioned on the floor, the safety cable must be fitted. (Cod. 105041/001 available on request).
This must be securely fixed to the support structure of the luminaire and then connected to the fixing point at the centre of the base.
7
Connecting and disconnecting power cable - Fig. 7
XTY OS

3. INSTALLATION AND START-UP

3.1 Installing the fixture

3.2 Connecting to mains supply

2
1
2
7
1
3
Continue