Functional Description - Reflexion MOBILSAT-1 Manual De Usuario

3-2. Functional Description

A. Power On
Function
The "Home position" means antenna folded completely to the body part which is the basic position for
◆
carrying in hard case.
B. Selecting the satellite
Function
C. Searching the satellite
Function
8
Description
i.
"Power" Switch
ii.
"Home State"
Light Solid ON
iii.
"Home State"
Light Solid ON
Solid ON
Description
i.
"Satellite
ii.
Up / Down button" Light
"OK" Button
iii.
Description
i.
"Satellite" light
ii.
Operation
When the all cable connections are completed, switch on
with the "Power Switch" button on the top of the controller.
If the position of antenna was in home position, "Home
state light" will be solid on to show it is ready to use.
If the position of antenna was not in the home position,
"Home state light" will flash, and the antenna will return to
the home position within a maximum 2 minutes. Then
"Home state light" will be solid on.
Operation
Once antenna and controller are connected, you can select
& change the satellite as you require.
Select the desired satellite using the "Up/Down" buttons,
then press the "OK" button to accept the setting.
If you select the wrong satellite, you can re-search target
satellite using the "Up/Down" button, then press the "OK"
button to accept the new setting.
Operation
After the satellite selection, "Home State" light will go off
and the LED light of the selected satellite will start flashing.
Once selected satellite has been found, the LED light of the
satellite will become solid.