EUROM VTW29 Instrucciones página 9

ASSEMBLY
Remove all the packaging and hold the main unit upside down.
Place the rear base plate on the main unit so that the cylinders
under the main unit enter the holes on the rear base plate. Now
place the front base plate on the rear base plate and the main unit.
Secure the main unit, rear base pate and front base plate using 4
screws. Run the power cord through the opening and secure it with
the clips intended for that purpose.
OPERATION
Check that all of the safety requirements have been met; then you
can plug the fan into mains. Once you have done so, choose an
operating speed by pressing one of the speed buttons (0=off, 1=low,
2=medium 3=high).
The fan will now start to operate.
Press the oscillate button to oscillate the air flow horizontally by
approx. 45°. The fan will then oscillate gently on its base. Press the
9
1. main unit
2. rear base plate
3. front base plate
4. inner screws
5. outer screws
6. power cord
7. oscillate button
8. speed buttons
9. timer
opening