Quick Start Guide
Charging
Plug the Lightning connector into your iOS device and
press the status button to charge. 1 LED: 0-25% 2 LEDs:
25-50% 3 LEDs: 50-75% 4 LEDs: 75-100%
25%
Recharging
Plug the USB connector into a wall charger, car
charger, or computer to charge. (For faster recharging,
use a 2.4-amp high-output charger.)
SmartSense
Charge your iPhone and IonBank at the same time.
SmartSense circuitry prioritizes current to your iPhone
and funnels the remaining power to recharge IonBank
simultaneously.
IonBank also features sync
pass-through to back up
your device to a computer.
50%
75%
100%
Wall charger
Car charger
Important Notes & Instructions
• Do not open, disassemble, puncture or modify your
IonBank in any way. Doing so not only voids the
product warranty, but could also result in re,
electrical shock, serious injury and/or property damage.
• To prevent a short circuit or other potential hazard,
keep any foreign metal object away from IonBank's
ports and connectors.
• It is normal that IonBank may be warm to the touch
during usage. However, if the product becomes hot
to the touch, starts to expand or swell, or emits
strong odor, discontinue use immediately and
contact Moshi to have the product examined.
• Keep IonBank away from heat sources such as thermal
vents, re, and strong direct sunlight. To prolong the
life of IonBank's power cells, do not store IonBank at
elevated temperatures (over 80°F or 27°C).
• Charge cycle e ciency may vary depending on device
model and other factors such as ambient temperature.
• Use only certi ed cables to charge your smartphone
and tablets. Non-compliant cables may not perform
as expected.
• To charge IonBank, use the internal USB cable and
plug into any powered USB port on a computer or
USB power adapter. You may use a 12W USB power
adapter for faster charging.
• Do not dispose your IonBank as household waste.
For more information on how to recycle this product,
please contact your city government or local
recycling center.