EN
34
Fault
Oil leakage
Lights not working
Insufficient suction
The cooker hood inclines.
Note: In case of doubt, please contact customer service before taking any of the
above measures. Always disconnect the unit from the power supply before opening it.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/EU this
symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should
be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of
this product, please contact your local council or your household
waste disposal service.
Possible Cause
One way valve and
the outlet are not tightly
sealed.
Leakage from the
connection of chimney
and cover.
The LED light is damaged.
The distance between the
cooker hood and the gas
top is too far.
The fixing screw is not tight
enough.
Solution
Take down the one way
valve and seal it with
sealant.
Take down the chimney
and seal it.
Have the LED light
replaced.
Refit the cooker hood to
the correct distance.
Tighten the hanging screw
and make it horizontal.