Android Ethernet Setup - Luvion Wifi Bridge Manual De Instrucciones

30

aNdROid ETHERNET SETUP

1
start the luvion app
2
tap 'click here to add device'
3 enter the uId code for the bridge in one of the following ways:
A. tap scan and scan the Qr code on the
side of the bridge using your device's camera. you
may be prompted to select the app that will be
used to scan the Qr code. select 'Google' and
press 'Always to continue' .
B: If your device is on the same network as the
bridge, tap 'search' to detect the bridge uId
automatically. tap the uId to enter.
C: tap uId and manually enter the uId printed on
the side of the bridge. you may need to do this
if your device does not have a camera.
enter the default password 000000 (six times
4
zero) and enter a name for your
monitor.