artograph Lightracer Elite Manual Del Usuario

THANK YOU for purchasing an Artograph Lightracer Elite Light Box!
The Lightracer Elite Light Boxes are ideal for artists, crafters, designers and photographers for use
with craft projects, fabric design, transferring sketches or designs, lettering, viewing slides and
transparencies and more! We hope you enjoy your new Lightracer Elite Light Box! If you have any
questions or suggestions, please contact us toll free at 1-888-975-9555.
IMPORTANT SAFEGUARDS
When using this light box, always follow basic safety precautions, including the following:
1. Read and understand all instructions before using.
2. Supervision is necessary when used by or near children. Do not leave unattended while in use.
3. Do not operate this equipment with a damaged power cord or if the unit has been dropped or otherwise damaged, until a qualified electrician has examined it.
4. If an extension cord is necessary, be sure it has a suitable current rating. Cords rated for less amperage than this equipment may overheat. Be careful to
arrange the cord so that it will not be tripped over or pulled.
5. Always unplug from the electrical outlet when not in use. Disconnect by grasping and pulling the adapter plug from the outlet; never yank the cord to
disconnect the plug.
6. Do not immerse in water. If the unit receives water damage, do not use until inspected by a qualified electrician.
LIGHT BOX FEATURES:
•
Brilliant Light. Florescent illumination provides a cool evenly-lit surface
for tracing or viewing art, designs or patterns.
•
Accurate Straight Edges. Perfect for aligning T-squares and rulers.
•
Aluminum. Lightweight with durable construction for a lifetime of use.
SET UP & OPERATION:
1. Remove light box from box and remove protective film from acrylic surface.
2. Plug the cord into an electrical outlet.
3. Depress the power switch located on the back side of the light box. For the single lamp 10" x12" model, hold the
switch in the "on" position until the light box is illuminated. It will take a couple of seconds for the lamp to warm up.
For all other models, flip the rocker switch to the on position.
Lightracer Elite & Elite II
USER'S GUIDE
SAVE THESE INSTRUCTIONS
306-247