Basic Instructions; User Manual - PNI SAFE HOUSE PG07 Manual De Usuario

EN
SPECIFICATIONS
• Power supply: 3V, 2 x AAA batteries
• Current: ≤ 160mA (in alarm state)
• WiFi standard: 802.11b/g/n
• Wireless communication frequency: 433MHz
• Radio transmission power: ≤10mW
• Alarm distance between sensor and magnet: ≥15 mm
• Working temperature: -26°C ~ +80°C

BASIC INSTRUCTIONS

Connecting to the WiFi network
1. Push up the bracket on the back of the sensor and install the batteries in the dedicated slot.
2. Search the Google Play or App Store for Tuya Smart or scan the code below. Open the
application after installation and register.
3. In the main interface of the application, press "Add device" or "+" in the upper right corner
4. From the list of devices, select "Security & Sensors" → "Contact sensor (Wi-Fi)"
5. Using a sharp object, reset the sensor by pressing and holding the Reset button for 5 seconds.
6. The LED on the sensor flashes to indicate that it has entered the connection mode
7. Select the WiFi network and enter the password
8. Wait for the sensor to connect.
2
Android iOS

User manual