senya SYWB-AP002 Manual Del Usuario página 28

Note: When the device is under sleep mode, if you need any sets, touch any button to quit the
sleep mode, and then start your settings. When you are finished, it will automatically enter sleep
mode after 5 seconds.
3. Night light
Press the Night light button
brightness/High brightness.
4. Timer setting
The device can be set for 1-12 hours of working time:
5) Press the Time setting button
icon on the display flashes. If there is no setting after flashing twice, it will quit the setting
mode.
6) Each press the Time setting button
button , it will decrease by 1 hour.
7) After setting the required working time, it will flashes twice and return to the current mode,
which means the setting is completed.
8) Start to count down the setting time until the device stops working.
Note: If you want to cancel the current set time, press the Time setting button
the timer icon will disappear, which means the cancellation is complete.
5. UV Light
UVC light can effectively kill viruses and bacteria in the air. Press the UVC button
6. Current air quality indicators
The value and color on the display will show current air quality.
Air quality
Good air
Moderately polluted air
Heavily polluted air
,the device provide 3 night light brightness:Low brightness/Medium
once to enter the timer setting mode. At this time, the "88"
, it will increase by 1 hour; each press the Night light
PM2.5 index
PM2.5 indicator
PM2.5 indicator
Green
Orange
Red
PM2.5 index
<75 Low fan speed
75-150 Medium fan speed
>150 High fan speed
28
for 3 seconds,
to turn on/off.
Auto mode