Intellinet 560962-v2 Guia De Inicio Rapido página 2

Instructions
This guide presents the basic steps to set up and operate this device.
For specifications, visit intellinetnetwork.com. Register your product at
register.intellinet-network.com/r/560962 or scan the QR code on the cover.
Connections
Setup is quick and easy!
1 Plug a Cat5e/6 Ethernet cable — up to 100 m long — from your powered source device (for
example, a PoE injector or switch) into the PoE In connector on the extender/repeater.
2 Plug a second Cat5e/6 Ethernet cable — also up to 100 m long — from the
device you want to transmit power and data to (for example, a PoE network
camera ) into the PoE Out connector on the extender/repeater.
The LED chart below explains how you can tell if your connections are good.
LED
PoE
Data
The distance chart below explains how much power you can expect to
be delivered to your PoE device based on how many extender/repeaters
you connect in series (5 is the maximum recommended).
Number of Extenders
Functionality
This extender/repeater supports the IEEE 802.3at protocol and is designed to work with all
IEEE 802.3af- or IEEE 802.3at-compliant devices. Note: If your connected device is not PoE
compliant, this extender/repeater can still be used to extend data-only transmission distances.
The two holes on the base of the housing allow you to screw the extender/
repeater in place to help maintain secure cable connections.
2
English
Color Status
Yellow
Green Blinking
Distance
1
200 m (656 ft.)
2
300 m (984 ft.)
3
400 m (1,312 ft.)
4
500 m (1,640 ft.)
5 600 m (1,968 ft.)
On Port is linked to a PSE/PoE device.
Off No PSE/PoE device is linked.
On Valid port connection.
Data transmitted/received.
Off No link established.
Max. wattage of powered device
Gigabit High-Power PoE+ Extender Repeater
Operation
24.592
20.140
16.176
12.56
8.60