Chicony Electronics MG-1131 Manual Del Usuario

Getting Started
Thank you for choosing this 2.4G Wireless Keyboard and Mouse Kit. It operates with digital radio technology to ensure unhindered communication
among the keyboard, the mouse and your computer without a cable connection.
The transmission and reception of the keyboard and mouse are free from angle restrictions.
Preparing Keyboard, Mouse and Receiver
Before working with your new keyboard and mouse, please look at "Hardware Installation", and take a few steps for a one-time preparation.
Hardware Installation
Optimal usage environment
• Place the receiver at least 20 cm from other electrical devices (e.g. monitor) to achieve optimum performance.
• The distance among the keyboard, mouse and receiver should not exceed 6 M long in distance.
• Do not place the receiver on any metal surfaces.
• Do not move optical mouse on the following surfaces -
Set up the mouse
Step 1: Take out the USB receiver
• Open the battery compartment cover at the bottom of the mouse; Take out the USB receiver (1) under the battery cover.
Step 2: Insert the battery into the mouse
The mouse requires one alkaline AA battery.
• Open the battery compartment cover at the bottom of the mouse.
• Push the battery puller in and then insert one AA battery (2) into the
battery compartment.
• Replace the battery compartment cover.
Step 3: Connect the USB receiver
• Plug the USB receiver dongle into a USB port on your PC.
• The system will take around 10 sec to detect your keyboard and mouse
automatically.
Step 4: Turn on the mouse
• Ensure the switch (3) at the bottom of the mouse is "ON"
Setting up the keyboard
Insert the battery.
• Remove the battery compartment cover (4) at the bottom of the keyboard by
pushing it in the direction of the arrow.
• Insert two AAA batteries.
• Place back the battery compartment cover (4).
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to instructions. Refer to "Important Battery Information"
for disposal instructions.
Working with Keyboard and Mouse
The following sections contain information on using the keyboard and the mouse.
Mouse
In addition to two buttons, the mouse also has a wheel that can be used as followings:
• As a 3rd button: By pressing on the wheel.
• For scrolling, e.g. in reading document or on viewing Internet pages: Scroll the wheel forward or backward.
Keyboard
• Re-install battery indicator
One amber-colored LED on upper-right edge of keyboard will keep lit up for 5 seconds when you re-install
new battery to the keyboard.
• Low battery warning
Amber-colored LED on upper-right edge of keyboard will keep flashing when it operates in low power.
*ST.12300.040*
English
Wireless Keyboard + Mouse Kits
Glass or any transparent materials
Dark surface
Mirrored or reflective surface
Mouse pad with too many colors
Rough surface
ST.12300.040
2
1
4
Power indicator
3
a