Saurium DLGE2500 Manual De Instrucciones página 48

THE NAMES OF EACH COMPONENT
(1) Tank
(2) Exhaust muffler
(3) Grounding
(4) AC socket
(5) Stick
(6) Current-breaker
(7) Engine switch
CHECKING BEFORE OPERATION
1. The place of the lubricant.
Note: Make sure engine is stopped in the horizontal plane when checking the
generator.
2. Insert the stick into the joints. If the oil-place is below the prescribed minimum, it's
unnecessary to turn the stick.
3. Fill enough lubricant to the prescribed maximum of the oil place.
4. Fix the stick firmly.
(8) Choke
(9) Starting handle
(10) Fuel valve
(11) Air filter
(12) Pipe-like frame
(13) Spark plug
(14) Tank cap
5