Tabla de contenido
Publicidad
Microsoft Screen Sharing for Lumia Phones (HD-10)
EN-US ES-LAM FR-CA PT-BR
9263810 / 1.0
ENGLISH: Keys and parts
To use the adapter, you need a Lumia device with screen projection
or wireless display, or a Wi-Fi CERTIFIED Miracast™ source
device. NFC only works with Lumia phones. For more info on
compatibility, support, software downloads, and troubleshooting,
go to www.microsoft.com/mobile/support.
1. Micro-USB charger connector
2. Reset pinhole
3. NFC area
4. Detachable NFC disc
5. HDMI cable connector
6. Indicator light
This product does not include an HDMI cable.
The surface of this product is nickel-free.
Read this user guide carefully before using the product. Also, read
the user guide for the device that you connect to the product.
Connect your adapter to the TV and the power supply
1. Connect one end of an HDMI cable to the HDMI port of the
adapter, and the other end to the TV.
2. Connect the charger to the adapter, and plug the charger into
a wall outlet.
3. Make sure your TV is switched on, and that the correct input
mode is selected.
When you see the Start mirroring screen with instructions, you're
ready to connect the adapter to your phone.
Connect your adapter with your phone or tablet
1. Make sure you've switched on NFC on your phone.
2. Touch the NFC areas of the 2 devices together.
3. In the project my screen view on your phone, tap Screen
Sharing.
4. To stop mirroring content, touch the NFC areas together again,
and tap Screen Sharing again in the project my screen view.
To connect a tablet, swipe in from the right of the screen, and tap
Devices > Project > Add a wireless display > Screen Sharing.
ESPAÑOL: Teclas y piezas
Lo invitamos a leer las instrucciones de este manual antes de
utilizar el dispositivo.
Para usar el adaptador, necesita un dispositivo Lumia con
proyección de pantalla o pantalla inalámbrica, o un dispositivo
de origen con Wi-Fi CERTIFIED Miracast™. NFC solo funciona
con teléfonos Lumia. Para obtener más información sobre
compatibilidad, asistencia, descargas de software y solución de
problemas, visite www.microsoft.com/mobile/support.
1. Conector del cargador micro USB
2. Orificio de restablecimiento
3. Área NFC
4. Disco desmontable con NFC
5. Conector de cable HDMI
6. Luz indicadora
Este producto no incluye un cable HDMI.
La superficie de este producto no contiene níquel.
Lea atentamente este manual del usuario antes de usar el
producto. Además, lea el manual del usuario del dispositivo que
desea conectar al producto.
Conecte el adaptador al TV y a la fuente de alimentación.
1. Conecte un extremo de un cable HDMI al puerto HDMI del
adaptador y el otro extremo al TV.
2. Conecte el cargador al adaptador y enchufe el cargador a un
tomacorriente de pared.
3. Asegúrese de que el TV esté encendido y de que el modo de
entrada correcto esté seleccionado.
Cuando vea la pantalla Start mirroring con instrucciones, estará listo
para conectar el adaptador al teléfono.
Conecte el adaptador al teléfono o la tableta.
1. Asegúrese de que NFC esté activado en su teléfono.
2. Haga que las áreas de NFC de los dos dispositivos se toquen.
3. En la vista Proyectar mi pantalla que se ve en el teléfono, toque
Screen Sharing.
4. Para dejar de visualizar contenido, haga que las áreas de NFC
se toquen nuevamente y vuelva a tocar Screen Sharing en la vista
Proyectar mi pantalla.
Para conectar una tableta, deslícese hacia el centro desde la derecha
de la pantalla y toque Dispositivos > Proyecto > Agregar una
pantalla inalámbrica > Screen Sharing.
FRANÇAIS : Touches et composants
Pour pouvoir utiliser l'adaptateur, vous avez besoin d'un téléphone
Lumia muni de la fonction de projection de l'écran ou d'affichage
sans fil, ou d'un appareil source Wi-Fi CERTIFIED Miracast™. La
communication en champ proche fonctionne uniquement avec
les téléphones Lumia. Pour obtenir plus de renseignements sur
la compatibilité, le soutien, le téléchargement de logiciels, et le
dépannage, rendez-vous au www.microsoft.com/mobile/support.
1. Prise pour chargeur micro-USB
2. Trou de réinitialisation
3. Zone NFC
4. Disque NFC amovible
5. Prise pour câble HDMI
6. Voyant lumineux
Ce produit ne comprend pas de câble HDMI.
La surface de ce produit ne contient pas de nickel.
Lisez le présent guide d'utilisation attentivement avant d'utiliser le
produit. Lisez également le guide d'utilisation de l'appareil que vous
connectez au produit.
Branchez votre adaptateur sur votre téléviseur et sur
le bloc d'alimentation
1. Branchez une extrémité d'un câble HDMI sur le port HDMI de
l'adaptateur, et l'autre extrémité sur le téléviseur.
2. Branchez le chargeur sur l'adaptateur, puis branchez le chargeur
sur une prise murale.
3. Assurez-vous que votre téléviseur est allumé, et que le mode de
saisie adéquat est sélectionné.
Lorsque vous voyez l'écran de Start mirroring avec les instructions,
vous pouvez brancher l'adaptateur sur votre téléphone.
Branchez votre adaptateur sur votre téléphone ou votre
tablette
1. Assurez-vous d'avoir activé la connectivité NFC sur votre
téléphone.
2. Mettez en contact les zones NFC des deux appareils.
3. Sur l'écran de projection de votre téléphone, appuyez sur la
fonction de Screen Sharing.
4. Pour cesser la mise en miroir du contenu, mettez de nouveau en
contact les zones NFC, et appuyez encore une fois sur la fonction de
Screen Sharing sur l'écran de projection.
Pour brancher une tablette, faites glisser votre doigt de la droite
vers le centre de l'écran, et appuyez sur Périphériques > Projeter >
Ajouter un affichage sans fil > Screen Sharing.
PORTUGUÊS: Teclas e componentes
Para usar o adaptador, é necessário ter um dispositivo Lumia com
projeção de tela ou tela sem fio ou um dispositivo de origem Wi-Fi
CERTIFIED Miracast™. O NFC só funciona com telefones Lumia. Para
obter mais informações sobre compatibilidade, suporte, downloads
de software e solução de problemas, visite o site
www.microsoft.com/pt-br/celulares/suporte.
1. Conector do carregador micro-USB
2. Orifício de pino para redefinição
3. Área NFC
4. Disco NFC destacável
5. Conector do cabo HDMI
6. Luz indicadora
Este produto não inclui um cabo HDMI.
Não há níquel na superfície deste produto.
Leia este Manual do Usuário atentamente antes de usar o produto.
Leia também o Manual do Usuário do dispositivo que você conectar
ao produto.
Conectar o adaptador com a TV e a fonte de alimentação
1. Conecte uma extremidade de um cabo HDMI com a porta HDMI
do adaptador e conecte a outra extremidade com a TV.
2. Conecte o carregador com o adaptador e conecte o carregador
com uma tomada.
3. Certifique-se de que a TV esteja ligada e o modo de entrada
correto selecionado.
Quando você vir a tela Start mirroring com instruções, estará pronto
para conectar o adaptador com o telefone.
Conectar o adaptador com o telefone ou o tablet
1. Certifique-se de ter ativado o recurso NFC no telefone.
2. Encoste as áreas NFC dos dois dispositivos.
3. Na visualização Projetar minha tela no telefone, toque em Screen
Sharing.
4. Para interromper o espelhamento de conteúdo, encoste as
áreas NFC novamente e toque em Screen Sharing mais uma vez na
visualização Projetar minha tela.
Para conectar um tablet, deslize a partir do lado direito da tela e
toque em Dispositivos > Projetar > Adicionar tela sem fio > Screen
Sharing.
ENGLISH:
Product and safety info
Take care of your device
Handle your device, charger and accessories with care. The following suggestions help you keep
your device operational.
• Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain
minerals that corrode electronic circuits. If your device gets wet, let the device dry.
• Do not use or store the device in dusty or dirty areas.
• Do not store the device in high temperatures. High temperatures may damage the device.
• Do not store the device in cold temperatures. When the device warms to its normal
temperature, moisture can form inside the device and damage it.
• Do not open the device.
• Unauthorized modifications may damage the device and violate regulations governing
radio devices.
• Do not drop, knock, or shake the device or the battery. Rough handling can break it.
• Only use a soft, clean, dry cloth to clean the surface of the device.
Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place
credit cards or other magnetic storage media near the device, because info stored on them may
be erased.
Recycle
Always return your used electronic products, batteries, and packaging materials to
dedicated collection points. This way you help prevent uncontrolled garbage
disposal and promote the recycling of materials. All materials of the device can be
recovered as materials and energy. Check how to recycle your Microsoft Mobile
products at www.microsoft.com/mobile/recycle.
Battery and charger info
Charge your device with AC-20U or AC-60U charger. Charger plug type may vary.
Microsoft Mobile may make additional battery or charger models available for this device.
Implanted medical devices
To avoid potential interference, manufacturers of implanted medical devices recommend a
minimum separation of 6 inches (15.3 centimeters) between a wireless device and the medical
device. Persons who have such devices should:
• Always keep the wireless device more than 6 inches (15.3 centimeters) from the medical device.
• Turn the wireless device off if there is any reason to suspect that interference is taking place.
• Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device,
consult your health care provider.
Certification information (SAR)
This device model meets guidelines for exposure to radio waves.
Your device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure
to radio waves recommended by international guidelines. These guidelines were developed by
the independent scientific organization ICNIRP and include safety margins designed to assure the
protection of all persons, regardless of age and health.
The exposure guidelines employ a unit of measurement known as the Specific Absorption Rate or
SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over ten
grams of tissue. Tests for SAR are conducted using standard operating positions with the device
transmitting at its highest certified power level in all tested frequency bands.
Your device is also designed to meet the requirements for exposure to radio waves established
by the Federal Communications Commission (USA) and Industry Canada. This device has been
evaluated for compliance with those RF exposure limits at 20 cm from body.
Copyrights and other notices
DECLARATION OF CONFORMITY
Hereby, Microsoft Mobile Oy declares that this HD-10 product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. A copy of the
Declaration of Conformity can be found at www.microsoft.com/mobile/global/declaration/
declaration-of-conformity.
The availability of products may vary by region. For more info, contact your dealer. This device
may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS." EXCEPT AS REQUIRED BY
APPLICABLE LAW, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR
CONTENTS OF THIS DOCUMENT. MICROSOFT MOBILE RESERVES THE RIGHT TO REVISE THIS
DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL MICROSOFT MOBILE OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF
DATA OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES
HOWSOEVER CAUSED.
Reproduction, transfer or distribution of part or all of the contents in this document in any
form without the prior written permission of Microsoft Mobile is prohibited. Microsoft Mobile
operates a policy of continuous development. Microsoft mobile reserves the right to make
changes and improvements to any of the products described in this document without prior
notice.
Microsoft Mobile does not make any representations, provide a warranty, or take any
responsibility for the functionality, content, or end-user support of third-party apps provided
with your device. By using an app, you acknowledge that the app is provided as is.
FCC/INDUSTRY CANADA/MEXICO NOTICE
This device complies with part 15 of the FCC rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. For more info, go to
transition.fcc.gov/oet/rfsafety/rf-faqs.html. Any changes or modifications not expressly
approved by Microsoft Mobile could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician for help.
TM © 2014 Microsoft Mobile. All rights reserved. Microsoft, Windows, the Windows logo and
Lumia are trademarks of the Microsoft group of companies. Third party products/names may
be TM of respective owner.
HDMI and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC.
Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.
Wi-Fi CERTIFIED Miracast™ is a trademark of Wi-Fi Alliance.
Warranty
The warranty period Microsoft Mobile provides for this product is 12 months. For details please
visit the local online warranty text web site www.microsoft.com/mobile/support.
ESPAÑOL:
Información del producto y de seguridad
Cuidado del dispositivo
Manipule el dispositivo, el cargador y los accesorios con cuidado. Las siguientes sugerencias le
ayudan a mantener operativo el dispositivo.
• Mantenga el dispositivo seco. El agua de lluvia, la humedad y todos los tipos de líquidos o
humedad contienen minerales que corroen los circuitos electrónicos. Si el dispositivo se moja,
deje que se seque.
• No utilice ni guarde el dispositivo en lugares sucios o polvorientos.
• No guarde el dispositivo en temperaturas altas. Las altas temperaturas pueden dañar el
dispositivo.
• No guarde el dispositivo en temperaturas frías. Cuando el dispositivo recupera su
temperatura normal, puede formarse humedad en su interior y dañarlo.
• No abra el dispositivo.
• Las modificaciones no autorizadas pueden dañar el dispositivo e infringir los reglamentos
sobre el uso de dispositivos de radio.
• No deje caer, golpee ni sacuda el dispositivo o la batería. Un manejo brusco puede
romperlo.
• Use un paño suave, limpio y seco para limpiar la superficie del dispositivo.
Algunas piezas del dispositivo son magnéticas. Su dispositivo puede atraer materiales
metálicos. No coloque tarjetas de crédito ni otros medios magnéticos de almacenamiento de
datos cerca del dispositivo, pues la información que almacenen puede perderse.
Reciclar
Cuando este dispositivo llegue al final de su vida útil, todos sus materiales se
pueden recuperar como materiales y energía. Para obtener información acerca de
cómo reciclar sus productos Nokia antiguos y dónde buscar los sitios de
recolección, vaya a www.nokia-latinoamerica.com/reciclaje o llame al Centro de
contacto.
Recicle la caja y los manuales de usuario de acuerdo con las normas locales de reciclaje.
Cuando coopera y envía todos estos materiales a uno de los sitios de recolección disponibles,
contribuye a la protección del medioambiente y ayuda a asegurar la salud de las generaciones
futuras.
Todos los productos eléctricos y electrónicos y las baterías pueden contener metales
reciclables y otras substancias que pueden ser peligrosas y se deben llevar a sus respectivos
sitios de recolección al término de su vida útil. Bajo ninguna circunstancia debe romper ni
abrir una batería ni otros materiales relacionados. No deseche estos productos junto con los
demás desechos domésticos, ya que esto puede contaminar el medioambiente o poner en
riesgo la salud humana. Todos los productos de Microsoft Mobile cumplen con los estándares
internacionales de producción industrial correspondientes y con todos los requisitos definidos
Publicidad
Tabla de contenido
