Konig Computer CMP-WEBCAM25 Manual De Uso página 2

Installation instructions.
1. Place the CD into the CD-ROM drive (Please do not connect the camera at this stage).
2. The CD will auto-run and the installation menu will come up on your screen (if it does not, please
run the program „Install.exe" from the CD-ROM drive). The menu will show the installation buttons
for the driver.
3. Click the button „Install camera driver" to start installation.
4. After finishing the installation, please reboot your computer to restart Windows.
5. Plug the camera into an available USB port on your PC or USB hub. Your computer will detect the
new device „PC camera". (You may need to restart your computer again once this is completed.)
6. If your model supports microphone function, you can use either a USB cable or additional audio
cable. If it is an audio cable, please plug it into the MIC-IN of your sound card.
7. Once you have plugged in your camera, please open AMCAP which can be found by clicking
START and then selecting the program list.
Note: if your PC displays a window regarding the software not having passed Windows Logo testing,
you can click "Continue anyway".
In the supplied AMCAP software, you can capture images, adjust settings of the webcam such as
zoom and tracking. See below:
Digital zoom & Tracking functions can be
adjusted in the AMCAP utility.
1