Dab/Dab+ Radio - MAJORITY FULBOURN II Guia De Instalacion

Instructions Guide

DAB/DAB+ Radio

Press the 'Mode' button (Ref.3) to switch to DAB/DAB+ Radio. In
DAB/DAB+ mode, the radio will synchronize with the time and
date of the station.
Ensure that the antenna is fully extended so that the best signal
is being received for the radio scan (Ref.15).
On first use, the radio on DAB mode will automatically scan all
stations and save them. If the radio has not automatically started
a scan, you can start an auto scan by pressing the 'Scan/Pair'
button (Ref.5) and then release. This will start scanning up the
frequency band and store all stations that have good signal.
The radio will automatically save all the stations with a strong
signal, up to 240 MHz. After searching has finished it will
automatically play the first station stored.
To browse through all stations that have been stored, use the
'Select' dial (Ref.7) to scroll through them. When on your chosen
station, press down the 'Select' dial (Ref.7) to select the station to
begin playing.
The radio will display station information when you press the
'Info' button (Ref.4). Press multiple times to view all information
available (See page 10).
When you turn the radio on again after it switching off, it will
automatically tune to the same station (DAB or FM) that was last
selected.
7