Black and Decker BD1666 Manual De Instrucciones página 5

Do not use damaged accessories.
Use only Black & Decker accessories.
This appliance is not intended for use by young or
infirm persons without supervision. Children must be
supervised to ensure they do not play with the
appliance.
Features
1. Dust bowl
2. Dust bowl release button
3. On/off switch
4. Turbo brush tool (VH800T only)
5. Turbo brush adaptor (VH800T only)
6. Crevice tool
7. Brush tool
8. Extension hose (VH800T only)
Assembly
Warning! Make sure that the appliance is switched off and
unplugged.
Assembly of the turbo brush tool (fig. A) (VH800T only)
Insert the round end of the turbo brush adaptor (5) into
the turbo brush tool (4)
Insert the turbo brush adaptor (5) into the front of the
dust bowl (1). Make sure that attachment is secure.
Fitting the accessories for vacuuming (fig. C)
The accessories provided can be used in various
combinations, depending on the task:
C1 General vacuuming/dusting.
C2 Vacuuming in confined spaces.
C3 Vacuuming stairs/carpets.
C4 Vacuuming upholstery or in corners.
Fitting an accessory (fig. B & C)
To fit an accessory, proceed as follows:
Insert the appropriate accessory into the front of the
dust bowl (1) (fig. C).
The accessory can also be fitted to the extension
hose (8) (fig. B).
Fitting the accessories for blowing (fig. D & E)
Warning! When using the appliance for blowing purposes,
wear eye protection. Keep the air intake free from
obstructions to prevent the motor from overheating.
Do not point the air outlet at yourself, bystanders or animals.
Make sure that the dustbowl and filter are clean before using
the blowing function.
To fit an accessory, proceed as follows:
Open the exhaust filter cover (10).
Insert either the crevice tool (6) or the extension
hose (8) into the opening. Make sure that it fits snug
against the rear of the appliance (fig. D).
Insert the other accessories into the extension hose (8)
as required.
Use
Warning! Before connecting to the power supply, make sure
that the appliance is switched off.
Switching on and off (overview)
Warning! Make sure that the accessories are securely
attached before switching on. Keep a firm grip on the
appliance, and especially the extension hose (8), when
switching on and during use.
To switch the tool on, set the on/off switch (3) to the
on position (I).
To switch the tool off, set the on/off switch (3) to the
off position (O).
Motor thermal safeguard
The motor of the appliance is fitted with a thermal safeguard.
This device automatically switches the appliance off in case
of overheating. If this occurs, proceed as follows:
Switch the appliance off and remove the plug from the
wall socket.
Allow the unit to cool. When the unit has cooled down,
check and clean the filters.
Re-insert the plug in the wall socket and switch the
appliance on.
Maintenance
Your Black & Decker appliance has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper care and regular cleaning.
Cleaning the dust bowl and filter (fig. F)
When the dust bowl (1) is full or the filter is clogged, empty
the dust bowl (1) and clean the filter. The filter is re-usable
and should be cleaned regularly.
Press the dust bowl release button (2) and remove the
dust bowl (1) (fig. F).
Remove the filter (9) from the dust bowl (1)
Brush any loose dust off the filter (9).
Remove any dust from the dust bowl (1).
Wash the filter (9) in warm, soapy water. The dust
bowl (1) can also be washed if necessary. Do not
immerse the appliance in water.
ENGLISH
5