Hazet-Werk 199-3 Manual De Instrucciones página 8

3. Commissioning
Changing mixers
The pressure sprayer offers the option to chan-
ge the type of foam. For this reason, there are
three different mixers.
The green mixer generates dry foam, which is
applied in particular when the surface being
cleaned should not be moistened. This mixer is
included in the scope of delivery.
The grey mixer offers an intermediate type of
foam, which is suitable for all types of activi-
ties. This mixer is installed in the device as a
standard.
The orange mixer provides wet foam with larger
coverage, so that a larger surface can be cove-
red (cars, windows, etc.). This mixer is included
in the scope of delivery.
} 10 04 61 · 42804 REMSCHEID · GERMANY · [ +49 (0) 21 91 / 7 92-0
\ +49 (0) 21 91 / 7 92-375 (National) · \ +49 (0) 21 91 / 7 92-400 (International)
8
2
Design and function
Notizen / Notes
HAZET-WERK Hermann Zerver GmbH & Co. KG
^ hazet.de · ] info@hazet.de
Always wear protective clothing, safety glasses
and chemical resistant gloves!
Procedure for changing the mixer
Procedure for changing the mixer: disconnect
the tank from the head piece. Pull on the suc-
tion pipe until the pipe itself and the mixer move
out of position. Remove the suction pipe from
the mixer. Use force to firmly press the new
mixer into the spot of the previous mixer, until
it is inserted. Insert suction pipe.
Filling the tank
Please observe the markings on the tank!
• Close the tank by screwing the operating
unit firmly onto the tank.
• Pressurise the HAZET Pressure Sprayers
by activating the handle lever 15 to 20
times.
• The HAZET Pressure Sprayers have an
integrated safety valve 1 to depressurise
the tank before opening.
199-3: The pressure sprayer is equipped with
a safety valve 1 . Stop activating the handle
lever once the safety valve begins to activate,
thus preventing further pressure build-up.