Beper 50.700 Manual De Instrucciones página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
EN
Sanitizing Steam Cleaner Use instructions
Description of the product Fig.A
1. Steam and child safety button
2. Cable
3. Tank
4. Indicator light
5. Round brush spayer
6. Bent sprayer
7. Measuring cup
8. Funnel
9. Flat sprayer
10. Brush sprayer
11. Long sprayer
12. Towel
13. Short sprayer
14. Safety cover
15. Extension for sprayer accessory
Use instructions
First use
Fill in the tank before use.
Place the item on a flat and stable surface, unscrew the safety cover (turn anticlockwise).
Put the funnel inside the tank mouth.
Take 175ml of water (by using the measuring cap) and insert into the tank while using the funnel. The maximum
capacity of the tank is 350ml, please don't overfill the tank.
Put back the safety cover and screw it firmly (turn clockwise).
Refill of the tank
Do not open the safety valve when using the appliance. You could only turn on the safety valve when power is
cut and the appliance is completely cooled down.
Press the steam button to reduce the pressure and let all the steam come out.
Unscrew slowly the safety cap, but do not remove it. Steam will slowly come out itself.
Let the appliance cool down for some minutes.
Remove the safety cap than follow the instructions as shown on the " first use".
Switch on
Check the electricity and the plug and make sure they match the requirements as described in the manual and
rating label, then insert the plug.
Wait for the water to heat up (5-6 minutes) than steam is ready.
To let steam come out, pull forward the safety button and press the button down fig.B
Release the button, insert the accessories according to different use.
Press the steam button again and start cleaning.
Accessories connection
Brush sprayer connection
Insert the brush sprayer to the body, follow the arrow to screw the sprayer in clockwise way. Proceed as indicated
in fig.C, In order to assemble extension to all available accessories.
Round or bent sprayer connection
Insert the round or bent sprayer to the short sprayer directly. Follow the instructions as showed in fig.D. Adjust
the direction of the sprayer.
13

Publicidad

Tabla de contenido
loading

Tabla de contenido