Programming Your Thermostat - V-TAC VT-5888 Manual De Instrucciones

PROGRAMMING YOUR THERMOSTAT

When your room is established successfully, it will display on the home
screen. The round button is to turn on/off your room. Click the line to
enter into thermostat programming mode.
( ) Power on/off button. When the screen is bright, it is power on; when
the screen is dark, it is power off.
( ) Mode button. In this mode you can set cooling, heating and ventila-
tion. ( ) is heating, (
( ) Fan speed button. Press this button to select auto, low, medium
and high speed. (
spead, and ( ) is high speed.
( ) Manual button - In this mode the heating can be set manually (i.e.
NOT using the pre-programmed settings)
( ) Program button - When this button shows, your thermostat is in
program mode and will follow any pre-set heating schedule. When in
Manual mode, press the (
( ) Economy button - In this mode, the temperature will be at 26
degrees. This temperature cannot be changed or adjusted.
( ) Lock/Unlock button. If the button is green, the screen is "locked". If
button is grey, the screen is "Unlocked".
*Slide the yellow button backwards or forwards to manually adjust the
temperature, the temperature will show in the centre of the page. After a
few seconds the current room temperature will show.
*When in program mode, click on the schedule setting(at the bottom of
the page) to be taken to be schedule page where you can simply click on
the working days (MON-FRI) and then the time/temperature. to adjust to
your preferred schedule.
* You can set 6 periods - time and temperature
* Repeat the above after clicking on the Weekend (SAT-SUN) settings at
the top of the page
* Once your schedule has been set, click on SAVE and the app will send
the programming to your thermostat and confirm the schedule has been
saved.
) is cooling, and (
) is auto speed, (
Auto
) button to select mode (
) is ventilation.
) is low speed, (
ENGLISH
) is medium
) and vice versa.
8