GB
General Instructions
Read these instructions carefully before
installation and use. Keep this manual for
future reference.
The product may only be used as set out in
the assembly and operating instructions.
The guarantee is only valid if the product
is used in the manner intended and in
accordance with the instructions.
Application
Ceiling fans are used primarily to equalize
the temperature in rooms with high
ceilings. Ceiling fan ICFX is designed for
use in demanding environments such as
heavy industry, agriculture, laundries and
washing bays, where it may be exposed to
corrosive conditions, dirt and dust and high
temperatures (50 °C).
Positioning
The fans should be placed symmetrically
in the premises where they can provide
optimum temperature spread. Make sure the
fans are always installed where there is no
risk to people or of contact with objects from
the rotating blades. Nor should they be placed
where they blow air directly on people.
Generally fan speed should be regulated so
that they don't cause draughts.
Fan installation and electrical connection
See fig. 1-16.
Max. surrounding temperature is +50 °C.
The roof fan(s) should only be wired by a
competent electrician and in accordance with
the latest edition of IEE wiring regulations.
12
ICFX
Assembly and operating instructions
Service and maintenance
See fig. 17-20.
ICFX is basically maintenance free, but
should be checked on a regular basis.
Important! Check the hanging brackets to
avoid the risk of the fan falling down.
Before cleaning the unit or carrying out
maintenance operations, turn the main
switch off and remove the plug from the
Power supply.
When several units are controlled with a
common control device the fan speed could
differ from one unit to another. In most cases
these differences will disappear when the
fans have been running for some time (about
a week). Another reason could be that the
lower protective cover is squeezed to tight to
the fan, adjust the coves if necessary.
Safety
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning use of
the appliance in a safe way and understand
the hazards involved. Children shall not
play with the appliance. Cleaning and user
maintenance shall not be made by children
without supervision.
Specifications for the power supply must
correspond to the electrical data on data
plate A (fig. 2).