Barkbusters BHG46.2-NP Instrucciones De Instalación

2
1 Multi Fit
Bar End
Clamp
Weight
22mm
PN: MFC-22
PN: BEW35
Pcs. 2 Pcs. 2
10
9
Flat Head
Flat Head
Bolt 45mm
Bolt
75mm
PN: M8X45FHCSZP
PN: M8x75FHCSZPFT
Pcs.
Pcs. 2
18
8mm Washer
17
20mm Spacer
PN: M8FW
PN: BSSRT20
Pcs.
Pcs. 1
WARNING:
Check there is clearance between the throttle grip end and the handguard to ensure a free closing throttle. Check operation of all
handlebar controls, specifically the throttle, front brake, kill switch and clutch to ensure they are operating correctly and are in accordance
with the OEM specifications. Do not ride the motorcycle if any controls are not operating correctly. Check periodically that all bolts are tight.
Disclaimer:
Rideworx inspects all products prior to packaging and strives toward improving its products. Our guarantee is limited to the replacement of defective products. This limited guarantee is in lieu of all other
guarantees or warranties implied or expressed. Buyer assumes all risk for any and all damage caused to him/herself, a third party and/or property by virtue of failure of this product. We make no
warranty as to products distributed by Rideworx, expressed or implied from our suppliers or third party vendors. This includes, without limitation, any warranties or merchantability and fitness for a
particular purpose. All products are offered and designed for use with standard machines. Rideworx makes no claims as to the products effectiveness on modified machines. Rideworx is the sole
determiner of abuse, misuse, installation errors and modifications. We assume no liability for any errors in listings, specifications, part numbers, prices or model applications. We reserve the right to
change specifications, product descriptions, product quality, pricing and application at any time without notice and without further obligation. These handguards are not designed to prevent injury in the
event of an accident or crash. Ensure all controls are free of the handguards each time you ride. Failure to follow the instructions or heed this warning could lead to loss of control of your motorcycle
and/or accident, injury or death. By installing and/or using a Rideworx product, you hereby accept and understand these stated terms and conditions and have followed all instructional steps.
INS-BHG46.2-NP
Honda Crosstourer VFR1200X / Varadero XL1000V, NC700X,
3 4
Connector
LEFT
PN: CP8-L PN: CP8-R
Pcs. 1 Pcs.
11 12
10mm Spacer
PN: BSSRT10 PN: BBE14A
2 Pcs. 2 Pcs.
Important: Installation of the handguard is safety-relevant work and can be complicated. We
recommend the installation be performed by a motorcycle service technician.
accepts no liability for damages caused by improper mounting.
All screws, bolts and nuts, including all replacement hardware provided by Rideworx, should
be tightened to the torque specified in the table. After the first 50km of riding check all screws,
bolts and nuts are tightened to the correct torque. We recommend a medium strength liquid
thread lock product on all fasteners.
3
FITTING INSTRUCTIONS
Kawasaki Versys 1000 & Suzuki V-Strom DL650/1000.
5
Connector Socket Head
RIGHT Bolt 30mm
PN: M6x30SHCSZP
Pcs. 2
1
14
Expander 13 Taper Nut
PN: NUT12
Pcs. 2
2
6 7
Socket Head Button Head
Bolt 20mm Bolt 25mm
PN: M6x20SHCSZP PN: M8x25BHCSZP
Pcs. 4 Pcs.
15
Collet Aluminium
Bar
PN: BAR-V-030-L
PN: COLLET14-17-S
Pcs.
Pcs. 2
Rideworx
Phone: +61 (0)2 4271 8244
Email: info@barkbusters.net
8
Nylock Nut
6mm
PN: M6LN
Pcs. 2
2
16
Aluminium
Bar
PN: BAR-V-030-R
1 Pcs. 1
Recommended
torque settings
M6 10 Nm (7.4 lbf ft)
M8 23 Nm (17 lbf ft)
Manufactured by: