Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 25 minutes
Tools Required for Assembly: Phillips Screwdriver (Not Included) and Wrench (included).
ASSEMBLY INSTRUCTIONS
1. To attach the decorative rings (G), insert
two M6 x 12mm bolts (AA) through the ring
bracket (F), over the decorative ring (G) and
through the holes in the ring bracket pad (E).
Then insert the same bolts through the pre-
drilled holes in the fire bowl (D) as illustrated
in figure 1. Tighten with two M6 nuts (BB)
using the wrench and a Phillips screwdriver.
Repeat this step for the other decorative ring
(G) on the other side of the fire bowl.
Hardware Used
AA
M6x12mm Bolt
BB
M6 Nut
EE
DD
Wrench
1
D
E
F
x 4
AA
x 4
4
BB
G
Publicidad
Tabla de contenido
