Transferring Calls To/From Your Handset; Voice Dialing; Advanced Call Functions; Av Mode Operations - Vivanco BTC 700 Manual Del Usuario

2.5.4 Transferring Calls to/from your Handset

Transferring calls to your handset: long press K2, Blue LED gives 1 blink per 3 seconds;
Red LED is off.
Transferring calls from your handset: short press K2, and Blue LED gives 3 quick blinks
per 2 seconds.

2.5.5 Voice Dialing

If your mobile phone supports voice dialing, you can make a call via voice dialing from
your BTC 700:
Voice Dialing：Long press K4，you will hear key tone，and Blue LED gives 3 quick
blinks per 2 seconds, then follow your handset user guide to complete voice dialing.
Cancel Voice Dialing：Short press K4. The Blue LED gives 3 quick blinks per 2 seconds
and the Red LED is off.

2.5.6 Advanced Call Functions

If your mobile phone has call waiting/conference functions, this Bluetooth BTC 700 can
support the function by following operations:
1. A new call comes in, While you are in talk:
1) Long press K3, to hold active call and accept incoming call.
2) Short press K2, to end active call and answer new call.
2. When two calls in progress, one is active and the other is on hold:
1) Long press K3, to toggle hold call and active call.
2) Short press K2, to end active call and accept hold call.
3) Long press K4, to make conference.
The Blue LED gives 3 quick blinks per 2 seconds and the Red LED is off.

2.6 AV Mode Operations

In AV status, you can operate the device as follows:
Long press K3, which is forward function.
Long press K4, which is backward function.
Long press K2, which is stop function.
Short press K2, which is play/pause function.
12