xpr MTT Guia De Inicio Rapido página 2

VIEW
OUTPUT CONNECTION FOR AC DEVICE - FAIL SECURE
OPERATION
MTT operates in Latch and Pulse mode.
The time is set by Dipswitch setting.
Note: Set the operating time only before
switching on power to the MTT.
If the operating time is to be changed,
select a new time setting and then wait a
few seconds for the circuit to re-adjust
before switching back the power.
This product herewith complies with requirements of EMC directive 2014/30/EU. In addition it complies with RoHS2 directive EN50581:2012 and RoHS3 Directive 2015/863/EU.
APPLICATION & WIRING
OUTPUT CONNECTION FOR DC DEVICE - FAIL OPEN
Ω
The table illustrates the dipswitch settings in different modes
Operation Switch 1
Latch Mode
10 Seconds
5 Seconds
3 Seconds
Approvals and Safety standards
Immunity: Meets to EN50082-2 (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5 and EN61000-4-6)
www.xprgroup.com
BACKLIGHT ON/OFF
Switch 2
ON ON
ON OFF
OFF ON
OFF OFF
DipSwitch
2