Descargar Imprimir esta página

Publicidad

Enlaces rápidos

MTPX-RS-MF
SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/
SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS
- Technology: Proximity (13,56 MHz, Mifare)
- Read range: up to 6 cm
- Output: RS-485
- LED, TAMPER AND BUZZER managed by the host
- Reads Mifare cards (Classic, Plus, DesFire, Ultralight)
- Operates on 9 - 14 VDC, 130mA
- IP65
- Compatibility: WS4 access controller
- Distance reader to controller: 80 meters
- Dimensions (mm): 92x51x27
- Panel Connection: Cable, 0.5 m
- Tecnologia: prossimità (13,56 MHz, Mifare)
- Campo di lettura: fino a 6 cm
- Uscita: RS-485
- LED, funzioni manomissione e segnale acustico gestiti
dall'host
- Lettura schede Mifare (Classic, Plus, DesFire, Ultralight)
- Alimentazione 9 - 14 VCC, 130 mA
- IP65
- Compatibilità: controller accessi WS4
- Distanza tra lettore e controller: 80 metri
- Dimensions (mm): 92x51x27
- Connessione del pannello: Cavo, 0.5 m
- Technologie: RFID (13,56 MHz, Mifare)
- Leseentfernung: bis 6 cm
- Ausgang: RS-485
- LED-, Sabotageschutz- und Summerkonfiguration über
Host
- Liest Mifare-Karten (Classic, Plus, DesFire, Ultralight)
- Spannungsversorgung: 9 - 14 VDC, 130 mA
- IP 65
- Kompatibilität: WS4-Zutrittscontroller
- Abstand zwischen Leser und Controller: 80 m
- Dimensions (mm): 92x51x27
- Kabelverbindung: Kabel, 0.5 m
MOUNTING/ MONTAGE/ INSTALLAZIONE/ MONTAJE/ MONTAGE/ MONTAGE
5 mm
3 (3 x 30mm)
Mifare reader with RS-485 output
USER'S MANUAL
EN
IT
DE
1 (M3 x 6mm)
www.xprgroup.com
IT ES DE NL
EN
FR
- Technologie : proximité (13,56 MHz, Mifare)
- Portée de lecture : jusqu'à 6 cm
- Sortie : RS-485
- LED, anti-sabotage et avertisseur sonore gérés par l'hôte
- Lecture de cartes Mifare (Classic, Plus, DesFire, Ultralight)
- Fonctionnement sur 9 - 14 VDC, 130 mA
- IP65
- Compatibilité : contrôleur d'accès WS4
- Distance entre lecteur et contrôleur : 80 mètres
- Dimensions (mm): 92x51x27
- Cablâge : 0.5 m de câble
- Tecnología: proximidad (13,56 MHz, Mifare)
- Rango de lectura: hasta 6 cm
- Salida: RS-485
- LED, control manual y timbre gestionados por el host
- Lee tarjetas Mifare (Classic, Plus, DesFire, Ultralight)
- Funciona con 9 - 14 V CC, 130 mA
- IP65
- Compatibilidad: controlador de acceso WS4
- Distancia del lector al controlador: 80 metros
- Dimensions (mm): 92x51x27
- Conexión del panel: Cable, 0.5 m
- Technologie: nabijheidslezer (13,56 MHz, Mifare)
- Leesbereik: tot 6 cm
- Uitgang: RS-485
- LED, sabotageschakelaar (tamper) en zoemer
aangestuurd door de host
- Leest Mifare-kaarten (Classic, Plus, DesFire, Ultralight)
- Werkt op 9 - 14 VDC, 130 mA
- IP65
- Compatibiliteit: WS4 toegangscontroller
- Afstand tussen lezer en controller: 80 meter
- Dimensions (mm): 92x51x27
- Paneelaansluiting: Kabel, 0.5 m
Bus for
the readers
Wrap the wires around the ferrite core (1 turn).
The ferrite core is provided with the kit and it is
used to reduce the EMI.
FR
ES
NL
Reader
Ferrite Core
1

Publicidad

loading

Resumen de contenidos para xpr MTPX-RS-MF

  • Página 1 MTPX-RS-MF IT ES DE NL Mifare reader with RS-485 output USER’S MANUAL SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS/ SPECIFICATIONS - Technologie : proximité (13,56 MHz, Mifare) - Technology: Proximity (13,56 MHz, Mifare) - Portée de lecture : jusqu’à 6 cm - Read range: up to 6 cm...
  • Página 2 Conexión entre el lector y el controlador WS4 Verbindung des Lesers mit WS4-Controller Aansluiting lezer op controller WS4 80 meters MTPX-RS-MF Connection two readers per RS-485 line Raccordement de deux lecteurs par ligne RS-485 Connessione di due lettori per linea RS-485 Conexión de dos lectores por cada línea RS-485...
  • Página 3 The readers for Doors 1.0 and 2.0 must be at address 0 and those for Doors 1.1 and 2.1 at address 1. For doors equipped with 2 readers, one must be at address 0 and the other at address 1. Recommended cabling: Multiconductor cable 2 twisted pair with shielding.
  • Página 4 SOFTWARE SETTINGS/ PARAMÈTRES DU LOGICIEI/ IMPOSTAZIONI SOFTWARE/ AJUSTES DE SOFTWARE/ SOFTWAREEINSTELLUNGEN/ SOFTWARE-INSTELLINGEN Go to Doors, select the Reader(fig.2) and then select “Mifare/Desfire” for Card. (fig.3) While off line, red LED blinks fast and buzzer beeps continuously. Once communication is established, the red LED and the buzzer stop.