Wiseup DVR-0022C Guia Del Usuario página 5

All manuals and user guides at all-guides.com
5.2. CONTINUOUS VIDEO RECORDING
5.2.1. After the DVR is powered on, press the Menu Button once, locate "Pre-capture"
and then choose "Manual".
5.2.2. Press the Cancel Button to exit system settings and press the Video Recording Button
once to start recording video continuously. Press it once again to stop recording video.
5.2.3. A video clip will be generated and saved every 10 minutes automatically.
5.2.4. The DVR is able to record video continuously for 3 hours straight on a full charge.
5.2.5. A 16GB SD card is able to store up to 3 hours of video footage.
[Note]:
Video Format: AVI
5.3. MOTION DETECTION VIDEO RECORDING
5.3.1. After the DVR is powered on, press the Menu Button once, locate "Pre-capture" and
then choose "Motion detect".
5.3.2. The DVR is now in motion detection recording mode. The DVR will start recording
a one-minute video when motion is detected.
5.3.3. If no motion is detected, the DVR will be back to motion detection standby mode
automatically until it detects motion again.
5.3.4. The DVR can run up to 4 hours when no motion is detected all the time.
5.4. CONNECTING DVR TO MONITOR
5.4.1. Make sure the DVR is powered on and the camera lens is inserted into the DVR
properly.
5.4.2. Press the Menu Button once, locate "TV Standard" then select "PAL" or "NTSC".