Use And Maintenance; Open And Close Buttons; Stop Function; Favourite Position (My) - SOMFY Movelite WireFree RTS Guia

EN
2.4.2. Re-setting the end limits
Readjusting the Open end limit (Fig 9)
1) Press the Open button to move the motorised product to the end limit to be readjusted.
2) Press the Open and Close buttons of the RTS remote control simultaneously until the motorised
product moves. The LED is red.
3) Press the Open or Close button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the my button until the motorised product moves.
Readjusting the Close end limit (Fig 10)
1) Press the Close button to move the motorised product to the end limit to be readjusted.
2) Press the Open and Close buttons of the RTS remote control simultaneously until the motorised
product moves. The LED is red blink.
3) Press the Open or Close button to move the motorised product to the new desired position.
4) To confirm the new end limit, press the my button until the motorised product moves.
2.4.3. Erasing the control point from the memory of the motor (Fig 11)
This reset deletes all the local remote control, however the end limit settings and favourite position are
retained.
To delete all the programmed remote control, use a pin to press and hold the button at bottom of the motor
until the motorised product moves twice.
All the remote controls are deleted.
2.4.4. Erasing the memory of the motor (Fig 12)
This reset deletes all remote control, all the sensors and all the end limit settings, and resets the motor' s favourite
position (my).
To reset the motor, use a pin to press and hold the button at bottom of the motor until the motorised product
moves 3 times.
All the settings are erased.

3. USE AND MAINTENANCE

This drive is maintenance-free

3.1. OPEN AND CLOSE BUTTONS

Pressing the Open or Close button fully opens or closes the motorised product.

3.2. STOP FUNCTION

The motorised product is moving.
Briefly press my: the motorised product stops automatically.
3.3. FAVOURITE POSITION (
The motorised product is stopped.
Briefly press my: the motorised product starts to move, and stops in the favourite position (my).
To modify or delete the favourite (my) position, see the section entitled "Additional settings"

3.4. ADDITIONAL SETTINGS

3.4.1. Modifying the favourite position (my) (Fig 16)
1) Place the motorised product in the desired favourite position (my).
2) Press my for ≈ 5 seconds until the motorised product moves: the desired favourite position (my) has been
programmed.
6
(Fig 13)
(Fig 14)
)
my
(Fig 15)
Copyright © 2018 SOMFY ACTIVITÉS SA, Société Anonyme. All rights reserved
3.4
1) P
2) P
3.4
1)
Pre
mo
2) Q
the
3.4
Mo
1) P
mo
the
2) P
3.4
1) M
the
Cha
2) m
Cha
3.5
3.5
Th
do
If th
3.5
To r
4
Ba
Ba
Ra
Op
In
Sa
Ba
par
file
com
.
Copy