Maintenance And Cleaning - Be Cool breakfast Instrucciones

All manuals and user guides at all-guides.com
ASSEMBLY
1
HOW TO OPEN THE HIGH CHAIR
Take the high chair out of the box to unlock the folding button
they are locked into position
2
HOW TO FIT THE TRAY
1. Pull the handle found under the shelf, then slot the tubes into the ends. Try sliding the tray
backwards and forwards to check that it is fastened correctly. (Diagram 2)
2. The tray can be set to two positions by pushing or pulling the handle found under the shelf.
OPERATING
HOW TO REMOVE THE TRAY
3
Slide the tray to the last position, marked red. Then press the side button to release the catch and
slide the tube completely off. Do the same to detach the other side. (Diagram 6)
HOW TO ADJUST THE SEAT HEIGHT
4
Hols the two handles, and simultaneously press the button to lower the seat. The seat has 6
different positions. (Diagram 4)
HOW TO ADJUST THE BACKREST
5
WARNING: The upright position is advised for children of up to 6 months
Press the button on the back of the seat, the seat can be reclined in 5 positions. (Diagram 5)
HOW TO ADJUST THE LENGTH OF THE FOOTREST
6
Press the small buttons found on both sides of the footrest and adjust the length to the required
position. There are 3 possible positions. (Diagram 6)
HOW TO ADJUST THE FOOTREST
7
Press the large buttons on the sides of the footrest and turn the footrest to different angles.
There are 3 possible positions. (Diagram 7)
ASSEMBLY
HARNESS
8
WARNING: USE THE HARNESS AT ALL TIME
1. Place the child in the chair and fit the safety harness around the child's waist and over the
shoulders. Fit the crotch strap between the child's legs. Insert the male end of the waist belt and
the shoulder strap into the buckle of the crotch strap.
2. To release them, press both sides of the male clip until the belts are released.
HOW TO FOLD THE HIGH CHAIR
9
1. Set the high chair to the lowest position.
2. Simultaneously press the second safety catch and the folding button
the basket. Then, pull the basket until it can be folded and locked

MAINTENANCE AND CLEANING

Metal/plastic parts:
Wipe clean using mild soap and warm water. Dry thoroughly. Do not use ammonia based prod-
ucts, bleach or other chemical cleaners. Do not use abrasive cleaning products or sponges. Store
away from direct sunlight to prevent the fabric and plastic from fading. Check that the product is
completely dry before storing it away.
breakfast
2 . Lastly, pull the seat backrest to the required position
GB
1 . Next, pull the rear legs until
3 .
1 found in the middle of
2 .
13