How To Use; Working Methods - Dreame T20 PRO Manual De Usuario

How to Use

Working Methods

Select from two working methods for the vacuum, based on your needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the on/off switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the electronic lock to switch to Continuous Cleaning Mode when the vacuum is
running. Then release the on/off switch to make the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your fingers and avoid finger fatigue caused by holding the
switch.
Continuous
Cleaning Mode
Note:
• In this mode, briefly press the on/off switch to suspend the operation or start again，
and the working mode of the vacuum will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.
EN
13