Safety Instructions - Ribimex Ribitech PRSOUD100 Manual De Instrucciones Y Mantenimiento

III. SAFETY INSTRUCTIONS
Before using this product, read and understand all safety instructions.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to persons and animals.
Keep this manual for future reference.
Symbols
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas.
Caution! Risk of injury and/or damage and/or deterioration of product in case of non
compliance to safety requirements
Read the instructions manual.
Class II product with double insulation
Wear protective equipment: goggles
Wear protective gloves
Keep all your body parts away from heating parts (tip) and potentially hot surfaces (upper
housing...)
Keep persons (esp. children) and animals away from product and working area
Disconnect product from its power source before maintenance, cleaning ou any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or extension cord
is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its safe
disposal.
READ ALL THE INFORMATION BEFORE OPERATING THE PRODUCT.
1. Keep work area clean
Cluttered areas and benches invite accidents and injuries.
2. Consider work area environment
Do not expose product to rain or to humidity.
Do not use product in damp or wet locations.
Keep work area well lit (natural light or sufficient artificial lighting).
Keep work area well ventilated.
Do not use product where there is risk to cause fire or explosion (in the presence of flammable
liquids, solids or gas).
3. Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep children away
Do not let bystanders touch the tool or its power cable or extension cord.
All bystanders (esp. children) should be kept away from tool and work area.
Keep the product away from children or from their environment. Never allow children to operate the
appliance. Children should be supervised to ensure that they do not play with the appliance.
5. Store idle tools