System Components; Clorox® Total 360® Base Unit; Clorox® Total 360® Sprayer; Nozzle - CLOROX Total 360 CLX1100 Manual Del Usuario

SYSTEM COMPONENTS

The patented Clorox® Total 360® Electrostatic Sprayer was
engineered with the end-user in mind. It is durable, highly
mobile and incredibly effective for electrostatic delivery.
Clorox® Total 360® Base Unit
1 Air Compressor
2 Non-Marking Wheels
3 Sprayer Connect Line
4 Sprayer Holster
5 Handle Adjust
Buttons
6 Removable Drip Cup
7 Adjustable Handle
8 Peristaltic Pump
Circuit Breaker
9
Main Power
10
Switch
11 1-Gallon Chemical
Containers
12 Extension Cord
Holder
Cord Management
13
Hook
14 Frame
15 Pump Purge
Switch
16 Sprayer Electrical
Disconnect
17 Reservoir
Atomizes and propels the liquid.
Includes built-in auto-resetting
thermal safeguard against
compressor overheating.
Large wheels, for easy transport and
maneuverability, will not leave scuff
marks. Do not require inflation.
Connect line consists of three
components: electrical line, liquid line
and air line. The connect line connects
the sprayer to the base unit.
Holds the sprayer.
Adjusts handle height.
(Squeeze to adjust.)
Collects any dripping from the
sprayer.
Handle position is raised, lowered
and rotated by the two button snaps.
Provides liquid up to sprayer.
User resettable circuit breaker and
will only trip if a short occurs in the
base unit.
Powers system to a ready state.
Chemical containers
(not included with equipment).
Located at the rear of the unit for
extension cord storage.
Stores or hangs the extension cord.
ABS and glass-filled nylon frame
and hardware design for long-term
durability.
Purges product from liquid line.
(Press to purge.)
Electrical connection for sprayer.
A reservoir to ensure a consistent
liquid flow.
Clorox® Total 360® Sprayer
2
4
5
Trigger Button
1
2 Instrument Panel
3 Nozzle Cover
4 Sprayer Grip
5 Sprayer Connect

Nozzle

The nozzle assembly is located at the end of the sprayer. It is
composed of a spring-loaded contact, external O-ring, nozzle
cover, liquid tip and electrode. These are the only user-serviceable
components. To access the nozzle components, unscrew the nozzle
cover counterclockwise by hand. It is very important to follow all
maintenance and cleaning procedures to ensure that the sprayer
will function optimally. After servicing the nozzle, it is extremely
important to return the nozzle to its seat position and avoid
overtightening.
NOTE: As the sprayer becomes dirty from typical use, a 70%
isopropyl alcohol cleaner that is manually applied is recommended
on the outside surfaces. This discourages dripping from the nozzle.
3
1
1-click functionality /
operates the sprayer/device.
Indicates the power, sprayer
and electrostatics are on.
Located on the front of the sprayer.
Handle positioned for ambidextrous
use.
Connect line consists of three
components: electrical line, liquid line
and air line.
EN | 7