Publicidad
Enlaces rápidos
Charging Stand
Item # CS1720 & CS1730
CHARGING THE CORDLESS SWEEPER
1.
Connect the charging adapter to the charging jack of charging stand (Fig. 1).
2.
Place the cordless sweeper on the charging stand. (Fig. 2)
3.
Plug the charging adapter into the wall outlet(120V., 60Hz). Use only the charging
adapter supplied with your cordless sweeper. (Fig. 3)
4.
Your cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be
charged for a minimum of 20 hours.
5.
When recharging the unit, the "On/Off" switch on the sweeper must be in the "OFF"
position.
6.
The charging light indicator on the top of the sweeper will illuminate to indicate that
the sweeper is properly charging. If the charging light does not come on, press the
"On/Off" switch and the light should come on.
7.
To recharge, repeat step #1 to #3 above. Charging times will vary depending upon
the amount of usage between charging cycles.
Fig. 1
EURO-PRO Operating LLC
U.S.A.: 94 Main Mill Street, Door 16
Plattsburgh, NY 12901
Tel: 1 (800) 798-7398
Printed in Turkey
Fig. 2
Fig. 3
Canada: 4400 Bois Franc
St. Laurent, Qc H4S 1A7
www.euro-pro.com
Rev. 06/04
Publicidad
Manuales relacionados para EURO-PRO CS1720
Resumen de contenidos para EURO-PRO CS1720
- Página 1 Charging Stand Item # CS1720 & CS1730 CHARGING THE CORDLESS SWEEPER Connect the charging adapter to the charging jack of charging stand (Fig. 1). Place the cordless sweeper on the charging stand. (Fig. 2) Plug the charging adapter into the wall outlet(120V., 60Hz). Use only the charging adapter supplied with your cordless sweeper.
- Página 2 Base Cargadora Socle de recharge Art. # CS1720 & CS1730 CS1720 & CS1730 Article N RECHARGE DE LA BALAYEUSE SANS CORDON BASE CARGADORA DEL BARREDOR INALÁMBRICO Branchez l’adaptateur de recharge à la prise de recharge du socle de recharge 1. Conecte el cargador/adaptador al enchufe en la base cargadora (Fig. 1).