Cleaning & Maintenance - Forch 5424 360 Manual Del Usuario

Operation / installation
■ Loosen the locking screw (1) and
fully extend the feet. Subsequently
please
re-tighten the locking screw again.
■
Place the light on the tripod.
Use the receptacle on the underside
of the light, as well as the fastening
screw (2) for the fixing.
■
To change the height of the tripod,
please loosen the locking screw (3).
Pull out the tripod to the required
height, or maximum up to the warn-
ing label, and re-tighten the locking
screw.
■
Always connect the spotlight to the
power supply first before you switch
it on.
■
Switch the light off first, before dis-
connecting it from the power supply.
Cleaning / maintenance
Before cleaning / maintenance please
disconnect the spotlight from the power
supply.
The spotlight can be cleaned with hot water. Do not use any chemical solvent.
The spotlight does not contain any illuminant
which can be exchanged /replaced.
Disposal
The spotlight may not be disposed of in normal household waste.
For disposal, the spotlight must be sent to the respective public recycling system
(a communal disposal facility / approved disposal company).
2
Never extend the
3 tripod further than this
warning label!
1
Ensure a firm and
secure footing!