Zycoo SH30 Guía De Instalación Rápida página 7

Installation
1.Separate the speaker and the pedestal.
2.Use an 8 mm drill to drill 3 mounting holes for the pedestal as shown in Figure 1.
3.Push the anchors into the mounting holes and tighten then with a rubber hammer.
4.Install the pedestal to the mounting holes and fix with KA5*45 screws.
5.Install the horn speaker back to the pedestal and tighten the bolt.
6. Loose the angle adjustment knob to adjust the speaker angle, after you get a perfect angle, then tighten the knob.
7.Connect network cable and power supply.
English
120
φ64.0mm
φ5.0mm
Figure 1
05
Speaker Fixing Bolt
Angle Adjustment Knob
Pedestal