AEG CompactPower DBS7135 Libro De Instrucciones página 8

iron on its stand, ensure that the surface on which the stand is placed is
stable.
• Never leave the appliance unattended while connected to the supply mains.
• The appliance must be switched off and the mains plug withdrawn each
time after use, before cleaning and maintenance.
• The plug must be removed from the socket outlet before the water
reservoir is filled with water.
• The mains cable must not come into contact with any hot parts of the
appliance.
• Do not immerse the appliance in water or any other liquid.
• Do not exceed the maximum filling volume as indicated on the appliances.
• The filling aperture must not be opened during use.
• Before refilling of the water reservoir, please remove plug from socket.
• This appliance is intended for domestic use only. The manufacturer cannot
accept any liability for possible damage caused by improper or incorrect
use.
• Do not pour vinegar, descalers or other scented substances into the tank.
Otherwise the warranty may be revoked.
• Warning! Before cleaning, always disconnect the plug from the power point
and allow the iron to cool down on its stand.
The appliance confirm to the Directive 2006/95/CE and to Directive EMC
2004/108/CE. ALWAYS KEEP THESE INSTRUCTIONS.
IRONING CHART
FABRIC
Acrylic
Acetate
Nylon & Polyester
Rayon
Viscose
Silk
Cotton blends
Wool & wool blends
Cotton
Corduroy
Linen
Denim
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!
www.aeg.com
DBS7135_SteamStation_AEG_NO-FARSI.indd 8
All manuals and user guides at all-guides.com
TEMPERATURE SETTING IRONING RECOMMENDATION
Dry iron on wrong side.
Dry iron on wrong side while still damp or use spray to dampen.
Iron on wrong side while still damp or use spray to dampen.
Iron on wrong side of fabric.
Mainly dry iron. Steam can be used under manufacturer's
instructions.
Iron on wrong side. Use an ironing cloth to prevent shine marks.
Check label and follow manufacturer's instructions. Use setting fo
the fibre requiring lowest setting.
Steam iron on wrong side or use ironing cloth.
Dry iron while still damp or use spray to dampen. Use steam
medium to high.
Steam iron on wrong side or use ironing cloth.
Iron on wrong side or use ironing cloth to prevent shine marks,
to "max" especially with dark colours. Dry iron while still damp or use spray
to dampen. Use steam medium to high.
to "max" Use maximum steam.
8
2017-07-06 14:29:33