FRAM FrashBreeze CF10546 Boletín De Instalación

CF10546
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application: Chevrolet Aveo, Pontiac Wave, Suzuki Swift
Application:
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
FRAM Group Operations LLC
Danbury, CT 06810-5109 U.S.A.
©2012 FRAM Group IP LLC
FRAM Group (Canada) Inc.
2430 Meadowpine Blvd.
Unit 105 & 107
Mississauga, ON
L5N 6S2 Canada
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V. FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Edo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: TOOLS: Phillips-head Screwdriver. TOOLS:
LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle behind the glove box.
07-10
REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION. REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION. REMOVE
10 minutes or less
1. Sit in passenger side seat and open the glove box. (Fig 1)
10 minutes ou moins
10 minutos máx.
2. Push inward on both sides of the glove box to disengage retainers on each side and lower glove box toward the floor. (Fig 2)
3. Remove the glove box from the dash by unhooking the bottom hinges on each side. (Fig 3)
4. Once the glove box is removed you will see a metal cross brace with four screws securing it. Remove this crossbar by
removing the two screws at each end. (Fig 4) (It is necessary to remove this cross brace to enable you to remove the
filter from the housing.)
5. Through the glove box opening you created, locate the cabin filter cover and remove it by unlatching it from the bottom. (Fig 5)
6. Remove the dirty filter (Fig 6) and replace with the clean filter.
7. Re-install the cabin filter cover by putting it in place at the top and latching it at the bottom.
8. Re-position the cross brace and secure it with the four screws. It takes two screws on each end.
9. Re-hinge the glove box at the bottom and push the glove box closed while pushing in on each side.
1
4
2
5
3
6