Black and Decker BXVR500E Manual De Instrucciones página 8

ENGLISH (Original instructions)
Operation guideline indicators
State Display
Turn-off Light-off
Turn-on Red Light-on
Cleaning Blue Light-on
Recharge Flash blue
Charging Flash Blue
Flash red and
Error
beep
Fully
Blue light on
charged
OPERATE THE ROBOT VIA REMOTE
CONTROL
Function
Function information
Guidelines
1. When the apliance is in stan-
dby mode, press the button to
enter the auto-cleaning mode.
2. When the applicance is at
Start /Stop
any cleaning mode, press the
(button)
button to shift it to standby
mode.
3. When setting the time, press
this button to hold settings
Long-press the button and the
Forward
appliance will forward; relea-
button
sing, it stops moving.
Long-press the button and the
Left-turn
appliance rotates countercloc-
button
kwise; releasing, it stops
Long-press the button and the
Right-turn
appliance rotates clockwise;
button
releasing, it stops rotating.
Long-press the button and
the appliance rotates counter
Back button dockwise about 180º,then
move forward ,relasing,it stops
moving
8
PAIRING PROCESS
♦ If the remote control fails to respond, please check whe-
Operation
ther it's in low battery. If the problem is not the battery
Short-press to
then pair the remote control and the vacuum cleaner. To
enter in standby
do it follow the next procedure:
mode and then,
♦ In standby mode, long-press 6S till blue
Long press 4S to
meanwhile press
enter in OFF state
heard
Long-press 2S to
♦ An alternative solution is in off mode press
enter in Stanby state
the same time for 3s. When you hear a beep sound the
pairing process is completed.
Short-press
to enter in auto
cleaning mode
Double click to
enter in recharge
mode
PAUSE THE ROBOT
♦ To stop the robot press the operation button (D) or press
the on / off button
♦ To resume the cleaning cycle, press the operation button
(D) or press the on / off button
again.
♦ For the robot to return to the charging base (U) press the
Go Home button
POWER OFF THE ROBOT
♦ To turn off the robot press the operation button (D) until
the operation indicator goes off.
blinks,
in the remote control till beep sound
and
on the remote control.
on the remote control
.
at