Start Up; Anti-Static System; Dry Vacuum Cleaning - DeWalt D27902M Traducido De Las Instrucciones Originales

This appliance contains harmful dust.
–
Evacuation and maintenance work, in-
cluding the disposal of the dust collec-
tion containers, may only be performed
by specialists who wear the appropriate
protective equipment.
Do not use the appliance without the
–
complete filtering system.
Please follow the safety regulations ap-
–
plicable to the materials that are to be
treated.

Start up

The appliance allows 2 operating modes:
1 Industry vacuum cleaner mode (socket
not used)
2 Dust extractor mode (socket used)
 Connect the suction hose and insert in-
sert the suction nozzle or connect to the
dust-generating device depending on
the operating mode.
Warning
Do not vacuum without the filter elements;
otherwise, the suction motor can get dam-
aged and this can be hazardous to health
on account of increased release of fine dust
particles.
The horn blows when the air speed falls be-
low 20 m/s.
Note: The horn reacts to negative pres-
sure.
 Set the rotary switch to the correct suc-
tion hose cross-section.

Anti-static system

Static charge is deflected by providing
earthing to the connection nozzles. This
prevents the formation of sparks and cur-
rent shocks due to attachments (option)
with electrical conductivity.

Dry vacuum cleaning

The device is fitted with a paper filter
–
bag with locking slide, order no.
1003245-00 (5 pcs).
Horn
Note:You can use this appliance to take up
all types of dust up to dust class M. It is stat-
utorily necessary to use a dust collection
bag (see Filter systems for order number).
Note:The appliance is suited as industrial
vacuum cleaner and as dedusting device
for the mobile operation to take up dry, non-
combustible dusts with MAK values greater
than or equal to 0.1 mg/m
Warning
The flat pleated filter must must always be
in place while vacuuming.
To suck fine dust, you can also use an
–
additional paper filter bag, a dust dis-
posal bag (special accessory) or a
membrane filter (special accessory).
Inserting the paper filter bag
Illustration
 Release and remove the suction head.
 Insert the paper filter bag.
 Insert and lock the suction head.
Installing the dust disposal bag
Illustration
Note: The opening of the disposal bag
must be pulled all the way over the ledge of
the suction support.
 Release and remove the suction head.
 Attach the disposal bag (option).
 Pull disposal bag over the container.
 Insert and lock the suction head.
Install membrane filter
Danger
The membrane filter must not be used to
vacuum health-hazardous dusts.
Note: If you work without the paper filter
bag/disposel bag, you must use a mem-
brane filter to protect the suction head.
Illustration
 Release and remove the suction head.
 Pull the membrane filter (option) over
the container edge.
 Insert and lock the suction head.
– 3
EN
.
3
29