B
B
ODY
EASY INSTALLATION
INSTRUCTIONS
STEP 1
Remove your existing
shower head. To
remove, turn the
existing shower head
in a counterclockwise
direction.
STEP 4
In a clockwise
direction, screw
PowerSelect onto the
taped portion of the
diverter and hand
tighten.
ATTENTION:
WASHERS PRE-INSTALLED
IN HOSE ENDS
Washers must be inserted into both hose
ends for proper installation.
EASY TWIST
SPRAY
SELECTION
Enjoying multiple spray patterns
during your shower has never been
easier. With the PowerSelect's easy
twist design, simply rotate the easy
spray selector for a quick spray change.
+ P
AR
STEP 2
Remove any remnants
of old plumber's
tape and flush out
shower pipe for 5 to
10 seconds. Wrap
plumber's tape
clockwise 3 or 4 turns
around threaded end
of shower arm.
STEP 5
Clean area BodyBar
will be applied. Remove
covering from adhesive
strips – adhesive is
extremely powerful.
Place BodyBar in desired
location within shower.
Press and hold firmly in
place for 30 seconds.
WARNING:
ADHESIVE IS EXTREMELY STRONG
AND WILL STICK ON CONTACT
Oxygenics is not responsible for any injury or damage
resulting from improper installation, use,
or removal of the BodyBar.
USING THE DIVERTER
To change the shower spray: Place your index finger
on one lever and your thumb on the other lever and
rotate either clockwise or
counter clockwise
(depending on the
current position) until
you feel it click
into place.
S
OWER
STEP 3
Screw the diverter
clockwise onto the
taped portion of the
shower arm. Wrap
plumber's tape 3 turns
around threaded ends
of the diverter.
STEP 6
Attach hex nut end of
hose to diverter and
hand tighten. Attach
conical nut end of
hose to BodyBar and
tighten.
ELECT
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty, our
Customer Service team can be contacted by:
PHONE:
1-866-440-9257
775-420-5600
or
LIVE CHAT:
www.oxygenics.com
EMAIL:
support@oxygenics.com
ONLINE:
www.oxygenics.com/claims
Business hours:
Monday - Thursday 7:00 am to 5:00 pm PST
Friday 7:00 am to 4:30 pm PST*
*Closed on all nationally observed holidays
For use with automatic
compensating valves
rated at 1.35 GPM
(5.11 L/min) or less.