Garden Treasures GSS00133A Manual De Instrucciones página 9

ASSEMBLY INSTRUCTIONS
CANOPY ASSEMBLY
10. Align the holes in the support canopy crossbars (N)
with holes in the canopy side bar (L) on both sides.
For each hole, insert an M5 x 30 L bolt (AA) through
a canopy side bar (L) and into support canopy
crossbar (N). Repeat this procedure for the other
support canopy crossbars. Align the holes in side
support canopy crossbar (M) with holes in the bottom
of canopy side bar (L). For each hole, insert an
M5 x 30 L bolt (AA) through side support canopy
crossbar (M) and into canopy side bar (L). Place
one end of the canopy (O) over the canopy side
bars (L), fitting the corner over the ends of the canopy
side bar (L). Repeat this procedure for other canopy
side bar (L).
Hardware Used
M5 x 30 L Bolt
AA
11. Insert the knob (NN) through the grommet hole in
the canopy (O) into the canopy side bar (L). Stretch
the canopy (O) over the top of the swing and repeat
procedure on the other side of canopy side bar (L).
You can change the tilt of the canopy (O) by adjusting
the knobs (NN). Tighten all nuts and bolts using hex
and allen wrenches.
Hardware Used
Knob
NN
10
AA
x 12
11
NN
x 2
9
N
L
O
AA
AA
O
K
Lowes.com/gardentreasures
M