Pre-Assembly; Planning Assembly; Electrical Connection - HAMPTON BAY MES30BL-3 Manual De Instrucciones

Pre-assembly

PLANNING ASSEMBLY

Before you begin assembly, locate the instructions and hardware. Compare all parts with the Hardware Included and Package Contents
lists. Be sure you have all the parts and can identify them. A helping hand is always good. Assemble your stove with an adult assistant if
possible. Some pieces are heavy and will need to be held by a helper. Assembly time will take approximately 5-10 minutes.
Before assembly, use scissors to unwrap the parts from the packaging. Do not use a box cutter or exacto-knife, as you may cut into the
stove pieces inside the box and damage the finish. Check for the red hardware bag located inside the packaging, taped to the top of the
box. Do not discard any pieces. Use an appropriate screwdriver to insert and tighten all screws.
SPECIFICATIONS
Model No.
Dimensions W x D x H
Net Weight / Gross Weight
Voltage
Frequency
Watts / Amps

ELECTRICAL CONNECTION

WarninG: Electrical outlet wiring must comply with local building codes and other applicable regulations to reduce the risk of fire, electrical
shock and injury to persons.
WarninG: Do not use this stove if any part of it has been under water. Immediately call a qualified service technician to inspect the stove
and replace any part of the electrical system which has been under water.
MES30BL-3
20.9 in. x 13 in. x 24 in. (53 cm x 33 cm x 60,9 cm)
27.8 lbs / 31.8 lbs (12,6 kg / 14,4 kg)
120V
60 Hz
1200 W / 11.6 A
4