Blanco drink.soda EVOL-S Pro Manual De Instrucciones página 35

12
Depending on the situation in your base cabinet, it may be easier to connect the connection tube
to the T-piece fi rst (illustration 14) before you insert the refrigeration unit into the base cabinet
(illustration 13).
13
14
19 mm
15
Carefully and slowly remove the protective
fi lm from the display and recycle. Static charge
may cause display errors to appear on the
display. These will disappear automatically
after some time.
Insert the refrigeration unit into the base
cabinet.
Hygiene advice:
Do not contaminate water-bearing parts!
Attach the refrigeration unit connection tube
to the side outlet on the T-piece. Secure the
fl exible tube against twisting during tightening.
If, due to the specifi c installation situation, it is
advantageous to turn the tube connection, you
can easily loosen the nut on the refrigeration
unit, turn the connection to achieve the
desired orientation and then carefully tighten
the nut again.
EN
35