Troubleshooting; Technical Data - Mainstays MS61100016716 Manual De Instrucciones

PROBLEM
The appliance Appliance not plugged
is not working in
Wall outlet not
energized
Overheated appliance
Too much food in the
Cup
Malfunctioning
appliance
The blades are Too much food in
rotating very the Cup / Motor is
slowly overloaded
Not enough liquid
in the Cup / Motor is
overloaded
Food not fully Ingredients too large
blended
Too much food in the
Cup
Liquid leakage Parts not tightly
secured
Missing Seal Ring
Damaged Seal Ring
If additional assistance is needed, please contact our Customer Assistance at 1-866-321-
9509 (US).
Rated voltage:
Rated power input:
Blender_MS-160ZPSBLD_US_IM_V4_200507.indd 9

TROUBLESHOOTING

CAUSE

TECHNICAL DATA

120V ~ 60Hz
220W
SOLUTION
Insert the plug into the wall outlet
Check fuses and circuit breaker
Unplug the appliance from the wall outlet and
contact qualified personnel to check.
Remove some food, shake ingredients to
redistribute and restart blending operation
Unplug the appliance from the wall outlet
and contact qualified personnel to check and
repair the appliance
Remove some food, shake ingredients to
redistribute and restart blending operation
Add some liquid and restart blending
operation
Remove ingredients, cut them into smaller
pieces and then restart blending operation
Remove some food, shake the Cup to
redistribute the ingredients and then restart
blending operation
Check and secure the parts carefully
Place the required Seal Ring in the Blade Unit
Replace with a proper new Seal Ring
Capacity:
9
max. 16oz (473mL)
5/7/20 11:36 AM