Menu Setting - CPS CP225 Manual Del Usuario

4. MENU SETTING

4.1【Menu Setting】
Press 〔 〕key and〔 〕key simultaneously to enter Menu mode, press〔
desired menu and press〔
If no operation, 10 seconds will automatically exit the menu setting.
VOL SET
STEP 1-16
5. CHANNEL SETTING BRIEF NOTE
Press and hold the〔
〕key and〔
Press〔
〔 〕key to select the number of Channel.
〕key and the screen will display CTC off , press〔
Press〔
desired CTCSS/DCS ( CTCSS 1 – 53, DCS 1 – 104 )
〕key until "SC***" is blinking, to select the scanning ON/OFF by
Press〔
pressing〔
〕key.
pressing〔
〕key until "Po***" is blinking, to select Power HI/Lo by pressing〔
Press〔
key and confirmit by pressing〔
〕key to complete this setting or to press〔
Press〔
functions , press〔
to complete this setting.
〕key at the side and〔
Press〔
after Lock, the unit can only be allowed to adjust volume or transmit and receive.
〕key to select the function then press〔
CH SET TONE SET
CTCSS /
CH 1-20
DCS EDIT
〕key on the top of the unit.
〕key simultaneously until the letter CH is blinking, press
〕key and confirm it by pressing〔
〕Key.
〕key to select number, you may press〔
〕key simultaneously to LOCK /UNLOCK the unit,
〕key to choose
〕key to save it.
POWER
SCAN SET
SET
HI / LOW
OFF/ON
〕key to select your
〕key. to cancel the scanning by
〕key again to have the other
〕key at any time
〕