Synchronization And Reset - INKBIRD IBS-M1 Manual Del Usuario

All manuals and user guides at all-guides.com
04

Synchronization and Reset

4.1 Synchronization
1. Plug in the IBS-M1 Wi-Fi gateway properly and
connect it to your Wi-Fi network according to
instructions above.
2. Then install the battery to relevant
equipment properly, turn on the device and keep the
equipment close to the Wi-Fi Gateway.
There are 2 minutes for you to synchronize the
equipment with the Wi-Fi Gateway, the equipment
will enter working mode after 2 minutes.
Note: Please make sure that the IBS-M1 Wi-Fi
gateway is plugged in before turning on other
relevant devices.
3. The equipment and the Wi-Fi Gateway device will
be successfully synchronized in 2 minutes
generally. You can restart the relevant
thermometers or hygrometers to resynchronize with
the Wi-Fi Gateway when failed.
4. Once the equipment is synchronized with the
Wi-Fi Gateway device and the equipment is
successfully registered, the indicator light of
corresponding channel equipment will turn on, and
the Wi-Fi Gateway device will record the registration
information of the equipment, you don't need to
re-synchronize the relevant equipment with the
Wi-Fi Gateway device after changing batteries.
If the indicator light of the Wi-Fi Gateway
corresponding channel flashes for 3 to 5 seconds, it
means that the gateway has successfully received
the data of the channel once and updated the
current temperature and humidity in real time.
9