Cleaning And Maintenance - Ferm AGM1088 Traducción Del Manual Original

Mounting and removing the auxiliary grip
(fig. C)
Mounting
• Tighten the auxiliary grip (6) into one of the
mounting holes (13).
Removing
• Loosen the auxiliary grip (6) from the mounting
hole (13).
USE
Switching on and off (Fig. A)
• To switch the machine on, press the lock-off
button (1a) to the front and then press the On/
off switch (1b).
• To switch the machine off, release the On/off
switch (1b).

CLEANING AND MAINTENANCE

Before cleaning and maintenance, always
switch off the machine and remove the
mains plug from the mains.
• Regularly clean the housing with a soft cloth.
• Keep the ventilation slots free from dust and
dirt. If necessary, use a soft, moist cloth to
remove dust and dirt from the ventilation slots.
Only use sharp and undamaged grinding
discs.
Carbon brushes
If the carbon brushes are worn, the carbon
brushes must be replaced by the customer
service department of the manufacturer or a
similarly qualified person.
8
All manuals and user guides at all-guides.com
WARRANTY
Consult the enclosed warranty terms.
ENVIRONMENT
Disposal
Only for EC countries
Do not dispose of power tools into domestic
waste. According to the European Guideline
2012/19/EU for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
The product, the accessories, and the
packaging must be sorted for
environmentally friendly recycling.